Revive cuts the oxidation. Reboot levels. Fusion primes. Liquid Crystal Armour DIY coats. Activate locks it. Same wash-care as the COAT kit, with the correction steps an oxidized hull actually needs. This is a weekend. 12–18 months when maintained. 1-year limited guarantee.
Pick your length. Pick wool (rotary) or foam (DA). Made for gelcoat porosity, not borrowed from a car shop.
John cut this oxidized Beneteau with Marine Nano Shop chemistry. Chalky navy next to the restored patch. Mirror gelcoat after the cut, buffer still in the shot. That is the Restore job.
The gelcoat is chalky, faded, or oxidized. If the pad loads gray, you are not done cutting.
The hull still has gloss — that is New Boat. Already coated and still beading — Wash Care. Pro restoration kits are a tighter window if you already run a rotary every week.
A polisher. Wool = rotary. Foam = DA. Restoration kits still pack wool cutting pads for the heavy cut. Shade. 24 dry hours after the coat.
Revive Heavy Cut. Wool cutting pads are in the box even on the foam path. If the pad loads gray, keep going.
Reboot Medium Cut. This is the step people skip, and the haze they complain about later.
Fusion, then Liquid Crystal Armour DIY, then Activate. Same coat path as New Boat, on a hull that is actually ready.
Clay mitt × 1
MineralX, 16 oz × 1
Detox APC, 16 oz × 1
Revive Heavy Cut, 32 oz × 1
Reboot Medium Cut, 32 oz × 1
Prep Wipe, 16 oz × 1
Fusion SiO2 Primer Polish, 16 oz × 1
Liquid Crystal Armour DIY, 50 ml × 3
Activate, 16 oz × 1
Revitalize, 32 oz × 1
7.5" wool cutting pad × 2
Microfibers, waffle-weaves, applicators, magic erasers
Wool polish pad × 2 · Foam: 6" heavy polishing foam × 2 (foam kits still include the two wool cutting pads)
SKU starts LCADIYRK20FTW / LCADIYRK20FTF. 30 ft from $999. 40 ft from $1500.
Gelcoat still has gloss. Stop waxing every 90 days. New Boat kit.
Chalky, faded, oxidized. Cut it, then coat. Restoration kit.
Already coated and it still beads. Soap, spray, towels. Wash Care kit.
I have been using Liquid Crystal Armour on my boats for the past three years now with fantastic results. We are down here in Marco Island and John has been very helpful throughout the entire process. Not only is the product great, but so is the support.
The original application of LCA PRO HD over the entire topside lasted 13 months. I have received several inquiries and compliments on its appearance. Our hull is probably good for another year… still hydrophobic and glossy.
Cut, coat, and the 1-year limited guarantee: Marine Nano Shop handbook. After this kit, stay in Wash Care. Questions: 844-522-6266. Ships from Fort Myers.
Short answers. Human: 844-522-6266.
No. Coating over oxidation seals the fade. Cut until the chalk is gone.
Wool = rotary for the polish step. Foam = DA. The heavy cut still uses the wool cutting pads in the box.
Typical 18–22 ft center console. 30 ft is 23–30. 40 ft is 31–40.
A weekend. Cut is the time. The coat is the last afternoon.
This landing is the DIY Restoration kit. Pro is a tighter coating window. Pro HD is the highest build. Call 844-522-6266 if you already run Pro.
Wash Care. Do not go back to dish soap.
Restoration kit. From $650. Pick length and wool or foam. Ships from Fort Myers.
