My Cart

Revive Heavy Cut Nano Compound

From $34.99

Heavy cut compound for restoration of gelcoat with a oxidised dull finish or removing dry sanding scratches.  

- +

Is your vessel in need of major restoration? Revive is a revolution in reconditioning technology for gel coat and paint. This marine-grade heavy cut compound is formulated with precise diminishing abrasive cutting action which makes heavy correction a breeze, buffing out dry sanding scratches and heavy/light oxidation for a high-gloss finish. The formula carries plenty of lubrication allowing for longer play time and no gumming of the pads.

For best results, use Revive with a 100% wool compounding single-sided grip pad or double-sided pad. Follow up with Reboot and Ignite is recommended.

Features and Benefits
  • Minimal swirl removal post-application for a polish-like finish
  • Removes dry sanding scratches 800 to 1000 grit, plus finer wet sanding scratches
  • Does not contain waxes, fillers or silicone
  • Long product cycle
  • Designed for high-speed rotary buffing
  1. Shake well before using.

  2. Apply a 1” dab of Compound for a 1.5’ x 1.5’ section and spread with the cutting pad.

  3. Buff at a speed between 1,800 to 2,200 rpm.

  4. Work the buffer slowly form side to side and front to back until most of the product is gone and gloss appears.

  5. Repeat if necessary until scratches are removed.

  6. Wipe surface clean with a microfiber cloth.

Write Your Own Review
You're reviewing:Revive Heavy Cut Nano Compound
Your Rating