My Quote
My Cart

Revive Heavy Cut Nano Compound-1 Gallon

$119.99
- +
Description

Revive ushers in a new era of yacht/boat polishing. This heavy cut compound removes heavy and light oxidation with ease, won't gum up buff pads, and needs minimal swirl-removal afterwards. The formula carries a precise diminishing abrasive cutting action making marine compounding a breeze.

Revive can quickly remove 600 to 800 grit or finer dry sanding scratches from gel coats, leaving a high gloss finish. Revive is clean and does not contain waxes, fillers or silicone.

Designed for use with a high speed rotary buffer. Best performance when used with a 100% wool compounding single sided grip pad or a double sided pad. Follow with Reboot and Ignite for best results.

Features and Benefits
  • Great for restoring gel coat and tooling molded surfaces
  • Quickly leaves a deep, high gloss finish without waxes, silicones or fillers
  • Removes 800 grit or finer dry sanding scratches and 1,000 grit or finer wet sanding scratches
Directions
  1. Shake well before using. Do not apply in sunlight or on warm surfaces.
  2. Apply a 2” dab of Gel Coat Compound for a 2’ x 2’ section and spread with the cutting pad.
  3. Buff at a speed between 1,800 to 2,600 rpm (recommended speed is 2,200 rpm)
  4. Work the buffer side to side slowly in a figure eight pattern as you slowly buff the gel coat surface until most of the product is gone and gloss appears.
  5. Add more compound and repeat if necessary to remove deep scratches.
Reviews
Write Your Own Review
You're reviewing:Revive Heavy Cut Nano Compound-1 Gallon
Your Rating