My Quote
My Cart

Reboot Medium Cut Nano Compound

From $39.99

A Buffing Compound that Fits Your Needs

Between basic restoration and polished perfection, you’ll need the right balance. Reboot is abrasive enough to buff out swirls and scratches, but gentle enough to leave a glossy finish with ease. If you need a medium-cut compound that doesn't compromise quality, this precise formulation is for you.

- +
Description

Reboot medium cut marine compound is engineered with powerful synthetic cleaning agents and cutting edge diminshing abrasive technology to give your boats finish next-level gloss and depth. Our premium grade high gloss polishing compound is ideal for gel coat and marine paint applications. Reboot can be used in 1-step situations. Just enough abrasive to cut and finish down to nearly a swirl-free finish.

At Marine Nano Shop, we always put your satisfaction first. Come to us with any questions, comments or concerns you have about our products, and our support staff will be happy to make sure you get the most from your purchase.

If you want to restore your vessel to that professional, factory look, this precise compounding agent is a one-step solution that can rip of flatness and oxidation as well as polish.

Reboot is part of a comprehensive portfolio of marine-grade restoration products. For best restoration results, we recommend following up your Reboot application with Ignite as a final phase for that glossy, professional-level finish.

Reboot performs best when used with a 100% wool compounding single sided grip pad or double sided pad. Follow up with Ignite or Fusion for dark colors for best results.

Features and Benefits

Perfect for:

Details:

Light correction of fine scratches and oxidation

Creates a smooth, flat and even finish with incredible gloss and shine

Light swirl removal in gel coat and marine paint

Removes dry sanding scratches of 1500 grit

Long-lasting corrosion resistance and protection

Does not contain waxes, fillers or silicone

Maximizing clarity and depth of paint

Long product cycle

Directions
  1. Shake well before using. Do not apply in sunlight or on warm surfaces.
  2. Apply a 2” dab of Reboot Compound for a 2’ x 2’ section and spread with the cutting pad.
  3. Buff at a speed between 1,500 to 2,000 rpm (recommended speed is 1,800 rpm)
  4. Work the buffer side to side slowly as you slowly buff the gel coat surface until most of the product is gone and gloss appears.
  5. Add more compound and repeat if necessary to remove deep oxidation and flatness.
Reviews
Write Your Own Review
You're reviewing:Reboot Medium Cut Nano Compound
Your Rating