Liquid Crystal Armour Pro | 9H Marine Grade Ceramic Nano Coating-1 Ltr
A Ceramic Nano Coating for the Harshest Elements
Liquid Crystal Armour Pro is a clear, marine grade nano crystalline 9H glass coating formulated with a blend of TiO2 and SiO2 nanoparticles suspended in low VOC solvents. This technology allows for the coating to fully transfer to the pores of the substrate.
Liquid Crystal Armour Pro is a clear, marine grade nano crystalline 9H glass coating formulated with a blend of TiO2 and SiO2 nanoparticles suspended in low VOC solvents. This technology allows for the coating to fully transfer to the pores of the substrate. Developed with the installer in mind, our newer formulations provide an increase in the open work time of up to 10-15 minutes, meaning you can coat larger areas prior to wipe down. It is super easy to use and does not leave streaking or highspots that require polishing for removal.
By leveraging the latest nano technology, LCA Pro protects from harsh weather, chemicals, and UV rays while repelling water, stains, dirt and other contaminants. Although one coat of LCA Pro will last multiple times over compared to marine waxes on the market, it works exceptionally well when layered, improving longevity, shine, slickness, and dirt repellency with each coat.
Our team has found the Liquid Crystal Armour Pro to work extremely well on black plastic, rubber, glass, & stainless steel. The system is guaranteed to significantly extend the life of your vessel's finish and dramatically cut down on the necessity to compound.
Make sure surface is oxidation & swirl free using any of Marine Nano Shops high performance polishing products. Clean thoroughly using soap (containing no additives) and water. Decontaminate with Surface Wipe. When applying coating, use a suede applicator pad and apply roughly 14-16 drops of coating to applicator to a 14''x 14'' section. Start in the middle and spread to the outside of section. Perform 1 thorough pass vertically and 1 horizontally. Allow to dry for 1 minute and level lightly with a microfiber towel. Let dry for 4 - 24 hours and top with Activate Surface Spray to thicken coating, provide slickness & that hydrophobic effect. Use Activate as often as possible as a great maintenance item to extend the life of the coating.